Wing leveller (Factory #75/3) (LAA 10507) modification pictures

The table below shows the picture page (or pages) relevant to the Wing leveller (Factory #75/3) (LAA 10507) modification, as applied to Europa G-RODO, kit 435, LAA project 247-13482.

Click on any link to open that page in a new tab or window (depending on your browser settings).

To return to this page, close that new tab or window.

The navigation buttons on that page link to the main journal text (which will usually contain more detail about this modification) and to other picture pages (which may not be related to this particular modification).


Boring crank arm hole
Crank arm clamped to CS03 for drilling
Spraying CS05 torque tubes
Wing leveller servo mounted
Servo mount bolts safetied
Right-angle adaptor for wing-leveller servo
right-angle connector cover for wing leveller servo
wing leveller servo wire route
roll servo connector
roll servo connected
GPS talking to autopilot

Return to Milestones page
This page last updated 2022-04-09 15:42. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.