making stick-top switch mount (3)
|
|
making stick-top switch mount (3) |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
making stick top switch mount: 2013-09-09
Panasonic Lumix DMC-FT1
The slots for the switch actuators are now complete and milling is under way for the slots that will allow the switch fixing nuts to turn.
making stick top switch mount: 2013-09-10
Panasonic Lumix DMC-FT1
The completed mount for the stick-top switches, as originally designed. Alas, I found that the slots were just too narrow for my fingers to operate the switches comfortably, so with some reluctance I decided to remove the outer flanges.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||