making stick-top switch mount (4)
|
|
making stick-top switch mount (4) |
|
|
 |
Navigation & Acknowledgements |
making stick top switch mount: 2013-09-10
Panasonic Lumix DMC-FT1
I've milled off the outer flanges and am now chamfering the centre flange with a 45-degree cutter to make it more user-friendly.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||