 |
trailer spar clamp change
|
 |
trailer spar clamp change
trailer spar support moved: 2017-04-03 Panasonic DMC-FT1
The foot of the spar support post on the nearside of the trailer (which holds the starboard wing) in its new location. I had originally fitted it so that the upper bracket (out of sight at the top) sat nicely on the upper rail of the metalwork. However, this caused the post to be at the wrong angle and resulted in the inboard wheel of the wing dolly sitting up in the air. Here the old holes are visible - I have filled them with dowels epoxied in. I packed the space between the upper bracket and the upper rail with assorted washers on the fixing bolts.
|
This page last updated 2017-05-12.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages