making epoxy-flox pad for Hartwell latch
|
|
making epoxy-flox pad for Hartwell latch |
|
|
 |
Navigation & Acknowledgements |
fitting Hartwell latch: 2023-10-21 Panasonic DC-TZ90
Fitting Hartwell latch to starboard cowl access hatch cover. Quite a bit of epoxy-flox has squeezed out into the latch operating cutout and will need to be removed before it cures. Greased clecos are fitted in the holes away from the edge of the cover. Greased skin pins are fitted adjacent to the edge so that the operating tongue of the latch can be snugged up to the flange of the opening, but not so tight as to distort anything.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2023-11-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||