Thin spots on rudder hinge vee
|
|
Thin spots on rudder hinge vee |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
Thin strip on rudder hinge vee: 2007-08-20.
Nikon Coolpix 8400.
The vee between the rudder leading edge and the hinge flange was not filled as well as the outer surfaces and so it was rather easy to rub through the gel-coat to the glass and resin underneath.
Thin places on rudder hinge vee re-coated: 2007-08-20.
Nikon Coolpix 8400.
I had the idea that masking off the area to be re-coated would make things easier, but that proved to be wrong because the masking tape adhesive reacted with the gel-coat, leaving a sticky mess, and it had to be rubbed right down again to get rid of it.
Thin spot on rudder hinge vee: 2007-08-24.
Nikon Coolpix 8400.
After clearing up the mess from the masking-tape and re-coating those areas, I thought all was well until this thin spot appeared in a new area.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||