parting off stepped washer
|
|
parting off stepped washer |
|
|
 |
Navigation & Acknowledgements |
parting off stepped washer: 2016-10-20 Apple iPhone 6
Parting off a stepped washer from a length of 12mm aluminium bar, on my Cowells 90 lathe. The end of this long workpiece is supported by a live centre in the tailstock. The stepped washer is to fill a rivet hole accidentally drilled out to 1/4".
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2018-12-03, 17:00. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||