Handle for lifting forward end of fuselage
|
|
Handle for lifting forward end of fuselage |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
fuselage lifting device: 2013-06-24
Panasonic Lumix DMC-FT1
The home-made lifting device for the forward end of the fuselage. it is made from part of the base of an old office chair, attached to a piece of thick plywood that is bolted to the engine mount attachment points on LG01.
fuselage lifting device: 2013-06-24
Panasonic Lumix DMC-FT1
The home-made lifting device for the forward end of the fuselage. it is made from part of the base of an old office chair, attached to a piece of thick plywood that is bolted to the engine mount attachment points on LG01.
Fuselage forward end support: 2013-06-24
Panasonic Lumix DMC-FT1
The forward end of the fuselage supported by a home-made lifting device set on a wooden box which in turn rests on a stool. The lifting device is part of the base of an old office chair, attached to a piece of thick plywood that is bolted to the engine mount attachment points on LG01.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||