Retract lever holes

index sitemap advanced
search engine by freefind
notepad Navigation & Acknowledgements

Retract lever holes

surplus hole in retract lever

surplus hole in retract lever: 2014-12-13

Lumix DMC-FT1

Fitting the down gate latch and spring to the retract lever. Just visible above the hole in the retract lever for the latch pivot screw are the 2 attempts at drilling a hole to retain the end of the latch spring. The first one has a broken-off solid carbide bit stuck in it!

left-arrowgo to previous picture page notepadback to journal pagenotepad go to next picture pageright-arrow
listgo to list of photo pages list
Return to Rowland's home page

This page last updated 2015-01-05. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.