headrest hole brown foam routed out
|
|
headrest hole brown foam routed out |
|
|
 |
Navigation & Acknowledgements |
headrest hole edge routed for filling: 2018-11-17 Panasonic DMC-FT1
The access holes in the headrests need to have their edges reinforced with epoxy-flox. Here the inner brown foam layer has been routed out using a small cutting wheel on the Dremel tool.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2018-12-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||