gascolator hatch splash moulding
|
|
gascolator hatch splash moulding |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
gascolator access splash moulding: 2015-11-17 Panasonic DMC-FT1
The splash moulding surround for the gascolator access hole, with the anchor nuts positioned and holes drilled. The arrow indicates forward, to ensure correct orientation when bonding.
bonding gascolator access splash moulding: 2015-11-17 Panasonic DMC-FT1
Bonding the splash moulding in place around the access hole for dropping the gascolator bowl. One of the 3 clecos holding the moulding firmly in place is hidden behind the capped-off fuel line.
bonding gascolator access splash moulding: 2015-11-17 Panasonic DMC-FT1
Bonding the splash moulding in place around the access hole for dropping the gascolator bowl. 3 clecos hold the moulding firmly in place while curing.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2015-12-18. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||