Double tube clip material
|
|
Double tube clip material |
|
|
 |
Navigation & Acknowledgements |
double tube clip: 2008-01-31.
Nikon Coolpix 8400
2 layers of BID laid up over suitable formers and polyethylene sheet to make a continuous length of double tube clips. This will be cut into short pieces for holding the pitot and static tubing down to the bottom skin between the ribs in the port wing.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2012-12-12. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||