trimming balsa cowl spacer
|
|
trimming balsa cowl spacer |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
trimming balsa cowl spacer ring: 2022-03-12 Panasonic DMC-FT1
A thin card template used to mark the balsa cowl spacer ring for trimming to a slightly smaller diameter, so as to better align with the spinner.
balsa cowl spacer ring trimmed: 2022-03-12 Panasonic DMC-FT1
The balsa cowl spacer ring trimmed to a slightly smaller diameter, so as to better align with the spinner, with the thin piece of waste removed by the bandsaw.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-04-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||