 |
silicon sealer on comm radio antenna connexions
|
 |
silicon sealer on comm radio antenna connexions
comm antenna connected: 2021-02-18 Panasonic DMC-FT1
The RG58 coax cable soldered to the comm radio dipole antenna. I should, of course, have taken this picture BEFORE I applied the waterproofing silicon sealer which obscures the connexion! Just visible inside the fin is the white end of the stack of ferrite toroids on the cable. To support the solder joint as much as possible, the heatshrink around the toroids is bonded to the fin rib and port skin with more silicon sealer.
|
This page last updated 2021-03-03.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages