Europa #435 G-RODO Build Journal - 2012 06

index sitemap advanced
search engine by freefind
tickgo to list of milestonestick Navigation & Acknowledgements
day notes hours
2 Mark the LG03 bearings for orientation with felt-tip. Undo the 5/16" UNC bolts - they have been done up pretty tight! Position the bearings on the bottom tube of LG01 and offer up the assembly to the firewall. The clearance at the aft end of LG02 is not much either side so obviously important to use this assembly to check side-to-side alignment of LG01. 1428.0

left-arrowgo to previous page of journal listgo to list of narrative pages list go to next page of journalright-arrow
Return to Rowland's home page

This page last updated 2012-12-29. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.