filling trim link slot
|
|
filling trim link slot |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
link rod slot filled: 2014-07-26
Lumix DMC-FT1
Having determined that the fuselage slot for the trim link rod could be smaller, and prepared a template for the final required size and shape, I filled the existing slots with some spare brown foam. I carefully sanded off the gel-coat surrounding the slot to provide a bonding surface for a BID patch. I scuff-sanded a similar area of the pre-preg on the inside. This is how the starboard side looked once the brown foam had been tacked in position with rapid epoxy, ready for the BID layup.
link rod slot filled: 2014-07-26
Lumix DMC-FT1
Port side trim slot prepared for BID patch layup.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2014-09-07. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||