 |
potential hazard on sight gauge tubing
|
 |
potential hazard on sight gauge tubing
sight gauge tubing close to pulley: 2022-01-28 Panasonic DMC-FT1
Looking up through the port fuel tank outlet inspection hatch, showing the proximity of the sight gauge tubing and the rudder cable pulley. Although it took some pressure with a finger to push the tube into contact with the pulley, I decided that for safety I should fit a guard between the two.
|
This page last updated 2022-02-05.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages