 |
cutting semi-circular hole in baffle
|
 |
cutting semi-circular hole in baffle
cutting semi-circle out of baffle: 2016-09-14 Apple iPhone 6
Using a holesaw to cut a semi-circular notch in the starboard aft baffle, to clear the engine mount. The workpiece is very firmly clamped to the drill table for safety, particularly important here where it is a partial cut. There is a flat piece of wood interposed between the drill table and workpiece so the holesaw doesn't run into the drill table.
|
This page last updated 2016-10-05.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages