Finishing rudder tip
|
|
Finishing rudder tip |
|
|
 |
Navigation & Acknowledgements |
4 pictures on this page - scroll down to see the rest
Rudder tip with Dry Guide Coat: 2007-08-16.
Nikon Coolpix 8400.
The tip of the rudder with 3M Dry Guide Coat applied, ready for rubbing down with 240 grade wet-and-dry.
Slurry on rudder tip: 2007-08-16.
Nikon Coolpix 8400.
The tip of the rudder after some rubbing down with 240 grade wet-and-dry, showing the grey slurry that accumulates on both workpiece and rubbing block.
Rudder tip rinsed off: 2007-08-16.
Nikon Coolpix 8400.
The tip of the rudder and the rubbing block after rinsing the slurry off both. Note how the low (grey) areas are now much easier to see.
Rudder tip polished: 2007-08-16.
Nikon Coolpix 8400.
The tip of the rudder after rubbing down with progressively finer abrasive to 2000 grade, then polishing with Farecla G3.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||