Removing a bad top-hat layup
|
|
Removing a bad top-hat layup |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
removing bad layup: 2013-08-06
Panasonic Lumix DMC-FT1
The failed top-hat layup between the door frames being removed. I've cut roughly into it with a diamond disc on the angle grinder, taking care not to cut into the original structure.
bad layup removed: 2013-08-06
Panasonic Lumix DMC-FT1
With the faulty layup removed, it is clear how the BID has failed to conform to the foam shape.
bad layup removed: 2013-08-06
Panasonic Lumix DMC-FT1
The area of the forward top-hat layup cleaned up after removing the first attempt. The power file proved very useful for this remedial work and saved a lot of time and manual labour.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||