Release film for wing skin pre-bonding

index sitemap advanced
search engine by freefind
notepad Navigation & Acknowledgements

Release film for wing skin pre-bonding

About to pre-bond wing skin

About to pre-bond wing skin: 2007-11-13.

Nikon Coolpix 8400

The underside of the skin has been masked off with polyethylene sheet to stop it adhering to the ribs, and around each rib more polyethylene sheet is taped on to catch any Redux that squeezes out and drips off. The skin is hinged to the spar with masking tape for easy positioning, but correct alignment is ensured by a cleco at each end of the skin. Just visible near the angled rib is the hole in the root rib flange for one cleco.

left-arrowgo to previous picture page notepadback to journal pagenotepad go to next picture pageright-arrow
listgo to list of photo pages list
Return to Rowland's home page

This page last updated 2012-12-12. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.