wing socket hardpoint layups 1
|
|
wing socket hardpoint layups 1 |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
Fuselage hard-point layups: 2014-11-10
Lumix DMC-FT1
BID layups on the port side of the fuselage completed with peel-ply applied. Small BID patches have also been laid up at the corners of the spar holes where the gel-coat was removed.
Fuselage hard-point layups: 2014-11-10
Lumix DMC-FT1
BID layups on the starboard side of the fuselage completed with peel-ply applied. Small BID patches have also been laid up at the corners of the spar holes where the gel-coat was removed.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2014-12-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||