 |
hose insertion check
|
 |
hose insertion check
hose in socket: 2019-06-01 Panasonic DMC-FT1
Now that the hose is inserted fully into the socket, I have put tape around the hose, butting up to the socket, to mark the depth of insertion and insure that I know if the hose is pushed out during the assembly process.
|
This page last updated 2019-08-02.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages