firesleeve dip penetration test
|
|
firesleeve dip penetration test |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
dipped firesleeve test: 2019-11-22 Panasonic DMC-FT1
A short length of firesleeve cut open after dipping in the RTV-toluene mixture and drying. I had hoped the mixture might penetrate more deeply into the glass matrix. One end was dipped in a slightly more dilute mixture, but that does not appear to have visibly affected the degree of penetration.
dipped firesleeve test: 2019-11-22 Panasonic DMC-FT1
A short length of firesleeve cut open after dipping in the RTV-toluene mixture and drying. Although the mixture did not penetrate as deeply into the glass matrix as I had hoped, it does at least seem to have had the desired effect of holding the glass in place even when flexed quite severely.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2019-12-04. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||