Drill TP10
|
|
Drill TP10 |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
Drill TP10: 2011-11-25
Lumix DMC-FT1
Drilling the first hole in the TP10 bush.
Drill TP10: 2011-11-25
Lumix DMC-FT1
Drilling the 2nd hole in TP10. The head of the machine had to be lowered to achieve this because the drill chuck travel was not great enough to do it in one pass.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||