TP10 drill setup
|
|
TP10 drill setup |
|
|
 |
Navigation & Acknowledgements |
Edge finding: 2011-11-25
Lumix DMC-FT1
Finding the edge of the workpiece by slowly moving it towards the slow-turning drill bit, with a cigarette-paper interposed. When the paper is snatched away by the drill bit, the bit is just about in contact with the workpiece.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2013-01-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||