making hook on door lock hook plate stack
|
|
making hook on door lock hook plate stack |
|
|
 |
Navigation & Acknowledgements |
door lock hook plates roughed to shape: 2022-06-23 Panasonic DMC-FT1
The stack of 4 locking hooks during machining. The forward corners have both been milled. The hook shape has been roughed out with the hacksaw. The straight part (on the right of the VEE here) will be milled to the line on the template. The curved part (on the left of the VEE here) will have to be filed to final shape.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-07-14. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||