moving fuselage to rigging dolly

index sitemap advanced
search engine by freefind
notepad Navigation & Acknowledgements

moving fuselage to rigging dolly

fuselage on rigging dolly

fuselage on rigging dolly: 2014-10-16

Lumix DMC-FT1

The fuselage in process of transferring from the wooden dolly (seen at left edge of picture) that I have used during much of its construction to the steel rigging dolly supplied with the trailer by Roger Huttlestone. I lifted the fuselage off the wooden dolly by passing a length of scaffolding pole through the spar hole and lifting each end of that in turn onto a stool. Then I could roll the wooden dolly out from underneath the fuselage and wheel in the steel one.

left-arrowgo to previous picture page notepadback to journal pagenotepad go to next picture pageright-arrow
listgo to list of photo pages list
Return to Rowland's home page

This page last updated 2014-11-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.