First cushion cover made
|
|
First cushion cover made |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
1st cushion cover finished: 2024-08-08 Panasonic DC-TZ90
This is the first cushion cover that I have managed to sew up completely. It is made from a single piece of cloth, and fitted onto a reconstituted foam block. This block is one of the 300mm x 450mm x 50mm pieces. It is far from perfect but is perfectly adequate!
1st cushion cover finished: 2024-08-08 Panasonic DC-TZ90
The zip side of the first cushion cover I have made, fitted onto a 300mm x 450mm x 50mm reconstituted foam block. The zip seam is a bit wavy but I am not too bothered about the appearance as it will normally be hidden at the back.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2024-09-14. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||