cutting starboard cowl hatch hinge recess
|
|
cutting starboard cowl hatch hinge recess |
|
|
 |
Navigation & Acknowledgements |
cutting starboard cowl hatch hinge recess: 2023-08-28 Panasonic DC-TZ90
The starboard access hole on the cowl, with the moulded recess cut away for the hinge. Not enough was cut away here and I had to further increase the size of the cutout to make room for the hinge knuckle.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2023-09-09. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||