cowl assembled with clecos
|
|
cowl assembled with clecos |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
cowl test assembly: 2016-07-14 Panasonic DMC-FT1
The upper and lower parts of the cowl manufactured by Neville Eyre held together with clecos.
cowl test assembly: 2016-07-14 Panasonic DMC-FT1
The upper and lower parts of the cowl manufactured by Neville Eyre held together with clecos. This shows the mark for the centre of the flat area which is to be drilled 40mm for the propshaft.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2016-08-13. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||