 |
CO detector mount bonding
|
 |
CO detector mount bonding
bonding CO detector mounts: 2021-10-02 Panasonic DMC-FT1
Bonding the CO detector mounts to the face of the F14 Instrument Module, on the starboard side above the parcel shelf. The mounts were fitted in the keyhole slots on the back of the detector, and bonded to the IM with epoxy. To hold the detector in place with constant pressure, a suitable-length wooden prop was held down by 3 lead weights while the epoxy cured.
|
This page last updated 2021-11-07.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages