 |
drilling for centre cowl hatch hinge
|
 |
drilling for centre cowl hatch hinge
hinge holes drilled on centre cowl hatch: 2023-09-30 Panasonic DC-TZ90
The centre cowl hatch held in place with masking tape for drilling the hinge holes. The pre-drilled hinge was offered up from the inside of the cowl, and held in place with clecos through the fixed leaf. Here the lower hole on the hatch has been drilled through the moving leaf from the inside of the cowl, and a cleco fitted before drilling the second hole.
|
This page last updated 2023-11-02.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages