flap pushrod clearance problem
|
|
flap pushrod clearance problem |
|
|
 |
Navigation & Acknowledgements |
flap pushrod clearance: 2015-04-07
Lumix DMC-FT1
FL20 flap pushrod passing undesirably close to the bolt securing the rod-end bearing on the lugs at the centre of the pitch torque tube.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2015-05-05. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||