making cowl spacer ring
|
|
making cowl spacer ring |
|
|
 |
Navigation & Acknowledgements |
making balsa cowl spacer ring: 2022-02-12 Panasonic DMC-FT1
Constructing, from 12 segments cut from 1/4" x 1" balsa strip, the ring to reduce the gap between the cowl and spinner. In the centre is the aluminium template used to ensure that all balsa segments were cut exactly identical.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-03-06. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||