 |
LG02 propped up to check cable clearance
|
 |
LG02 propped up to check cable clearance
LG02 swinging arm propped up: 2013-06-26
Panasonic Lumix DMC-FT1
LG02 swinging arm propped up on wooden blocks to check the clearance for the rudder cables, which can be seen passing outside LG02 on each side of the tunnel. The fuselage is supported at forward and aft ends, and the wooden dolly removed, to allow access underneath for this work.
|
This page last updated 2013-07-07.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages