Wire spacer for Perspex bonding
|
|
Wire spacer for Perspex bonding |
|
|
 |
Navigation & Acknowledgements |
wire spacer for Perspex bonding: 2022-11-10 Panasonic DMC-FT1
A length of 0.8mm wire bent and taped in place on the starboard door rebate, to ensure space between edge of rebate and edge of Perspex glazing. Three of these wires were put in place along the bottom edge of the door rebate before starting to bond the Perspex.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-12-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||