profiling tailplane
|
|
profiling tailplane |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
profiling tailplanes: 2018-09-19 Panasonic DMC-FT1
Upper surface of starboard tailplane while planing most of the filler down near to the glass.
profiling tailplanes: 2018-09-19 Panasonic DMC-FT1
Upper surface of starboard tailplane after sanding with a 50 grit disc on the DA sander.
profiling tailplanes: 2018-09-19 Panasonic DMC-FT1
Quite a number of pinholes appeared while sanding down the filler on the tailplanes. Here are just a few examples.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2018-10-08. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||