getting ready to fill tailplane
|
|
getting ready to fill tailplane |
|
|
 |
Navigation & Acknowledgements |
preparing to fill tailplane: 2018-08-13 Apple iPhone 6
The starboard tailplane set on the blue foam support block. The foam below the leading edge needs to be trimmed back to clear the lead weights which will tension the nylon lines used for getting a consistent thickness of filler. Incidentally also visible are the highlighted threads in each ply of the UNI, and the guide lines marked on the foam underneath the glass at 30 degrees to the long axis.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2018-09-11. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||