trimming stainless steel sheet with power nibbler
|
|
trimming stainless steel sheet with power nibbler |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
power nibbler on temporary stand: 2019-05-23 Panasonic DMC-FT1
The handle of the power nibbler can be removed to allow it to be bench-mounted. I didn't bother doing anything fancy for this little job, just made a hole about the size of the thread roots in this redundant stand and screwed the nibbler into it, letting it cut its own thread in the chipboard.
trimming SS firewall panel with power nibbler: 2019-05-23 Panasonic DMC-FT1
Using the power nibbler to enlarge the hole in the starboard stainless steel firewall panel for clearance from the rudder crank and cable
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2019-06-04. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||