re-doing spar hole layups
|
|
re-doing spar hole layups |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
port spar hole layups re-done: 2014-10-31
Lumix DMC-FT1
Re-doing the layups at the forward and upper sides of the port spar hole. A piece of bent aluminium is being used to keep the layups in place while curing, to prevent them sagging into the spar hole, as happened at the first try.
starboard spar hole layup re-done: 2014-10-31
Lumix DMC-FT1
Re-doing the layup at the upper side of the starboard spar hole. A piece of bent aluminium is being used to keep the layup in place while curing, to prevent it sagging into the spar hole, as happened at the first try.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2014-12-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||