Rivet nut hole repair patch bonded
|
|
Rivet nut hole repair patch bonded |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
repair of rivet nut hole in starboard door: 2021-07-02 Panasonic DMC-FT1
The stepped bush and jacking screw removed to show the repair patch for the over-drilled door frame hole epoxied in place.
stepped washer for rivet nut hole repair: 2021-07-02 Panasonic DMC-FT1
The stepped bush and jacking screw, removed after the epoxy bond on the repair patch had cured sufficiently. The bush had been temporarily tacked onto the back of the repair patch with Shoo Goo, and a bit of wiggling of the screw after loosening it freed the bush.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2021-08-01. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||