uneven Redux coverage in port door manufacture
|
|
uneven Redux coverage in port door manufacture |
|
|
 |
Navigation & Acknowledgements |
port door rebate abraded for Perspex: 2022-12-09 Panasonic DMC-FT1
The rebate on the port door abraded for fitting the Perspex transparency. After removing the gel coat from the rebate is became clear that there were a few small areas where coverage of the Redux used in bonding the inner and outer halves of the door at the factory was not quite complete. So even the professionals have trouble getting bonds perfect!
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2023-01-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||