Masking port Perspex outside
|
|
Masking port Perspex outside |
|
|
 |
Navigation & Acknowledgements |
2 pictures on this page - scroll down to see the rest
masking the port door glazing: 2022-11-22 Panasonic DMC-FT1
The Perspex glazing for the port door with masking and protective polyethylene sheet applied to the outer face. The masking tape follows the line of the door rebate, leaving a narrow strip around the edge indicating the bonding area. Of course the bonding will be on the inner face, so the line of the masking tape has now to be transferred from outer to inner.
masking the port door glazing: 2022-11-22 Panasonic DMC-FT1
The inner face of the Perspex glazing for the port door with masking and protective polyethylene sheet applied to the outer face. The masking tape follows the line of the door rebate, leaving a narrow strip around the edge indicating the bonding area. Now ready to transfer the line of the masking tape from the outer to the inner face.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2022-12-02. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||