bonding lower port footwell conduit
|
|
bonding lower port footwell conduit |
|
|
 |
Navigation & Acknowledgements |
3 pictures on this page - scroll down to see the rest
securing port footwell conduit: 2020-04-14 Panasonic DMC-FT1
Bonding the clips that secure the conduit sections in the port footwell. Various clamps and weights are used to hold the conduit and the clips in place while the bond cures.
securing port footwell conduit: 2020-04-14 Panasonic DMC-FT1
Bonding the clips that secure the conduit sections in the port footwell. The piece of wood with the lead weights balanced so precariously on top of it is holding a clip in place at its bottom end.
securing port footwell conduit: 2020-04-14 Panasonic DMC-FT1
Bonding the clips that secure the conduit sections in the port footwell. Here is the angled bottom end of a piece of wood holding a clip in place.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2020-05-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||