painting flap hangers
|
|
painting flap hangers |
|
|
 |
Navigation & Acknowledgements |
4 pictures on this page - scroll down to see the rest
painting flap hangers: 2017-07-20 Panasonic DMC-FT1
The flap hangers and outrigger mechanism parts hung on a rack in port-to-starboard order ready for painting. The rack is suspended out in the carport which provides some shelter from wind but is a much less confined space for spraying than inside the garage. The parts had originally been primed (a long time ago) using a spray can from LAS which I think was labelled yellow but turned out more like pale green. It seems pretty good stuff as it resisted the acetone wipe I used for degreasing. Because some areas have been scuffed with repeated assembly, I am going to re-prime them fully before applying a white top coat.
painting flap hangers: 2017-07-20 Panasonic DMC-FT1
The flap hangers and outrigger mechanism parts after re-priming them with LAS green primer.
painting flap hangers: 2017-07-20 Panasonic DMC-FT1
The flap hangers and outrigger mechanism parts after applying a top coat of Halfords Appliance Gloss White.
painting flap hangers: 2017-07-20 Panasonic DMC-FT1
The flap hangers and outrigger mechanism parts moved into the garage after painting. They will stay on this rack, in correct order, until I am ready to re-fit the flaps.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2017-09-11. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||