 |
faulty oil pressure indication
|
 |
faulty oil pressure indication
oil pressure faulty indication: 2021-03-13 Panasonic DMC-FT1
The MGL TP-3 display after configuration, showing an incorrect value for oil pressure. I found out that the pressure sender was sticking. I removed the sender, gave it a few taps then checked that the resistance changed with an air line applied. After re-installing the sender, it worked OK and the TP-3 showed 0 bar.
|
This page last updated 2021-04-03.
I try to make this page as accessible as possible,
by adhering to HTML 4 standards.
|
|
|
|
I welcome comments on this website. However, because of the
amount of spam it attracts, I no longer post a direct e-mail
address on any page. Instead, please
click here to contact me.
You will have to confirm that you are human before the message
will be sent on to me.
|
go to previous picture page 
go to list of photo pages