Splash layup temporary bonding

index sitemap advanced
search engine by freefind
notepad Navigation & Acknowledgements

Splash layup temporary bonding

splash moulding attached to bulkhead with bondo

splash moulding attached to bulkhead with bondo: 2013-08-23

Panasonic Lumix DMC-FT1

The dots of polyester car-body filler have held the splash moulding firmly in place on the top of the containment bulkhead when the fuseage top moulding was removed, and the cling film has allowed the splash moulding to pop cleanly off the fuselage inner skin.

left-arrowgo to previous picture page notepadback to journal pagenotepad go to next picture pageright-arrow
listgo to list of photo pages list
Return to Rowland's home page

This page last updated 2013-10-16. I try to make this page as accessible as possible, by adhering to HTML 4 standards. Valid HTML 4.01! Valid CSS!
I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me.