altimeter knob shaft extender
|
|
altimeter knob shaft extender |
|
|
 |
Navigation & Acknowledgements |
4 pictures on this page - scroll down to see the rest
altimeter knob fouled: 2015-09-25
Panasonic Lumix DMC-FT1
This shows how access to the altimeter setting knob is restricted by the proximity of the Dynon D2.
shaft extension: 2015-09-25
Panasonic Lumix DMC-FT1
This is the shaft extension I made for the altimeter setting knob, from a piece of 5/16" hex brass.
altimeter knob extended: 2015-09-25
Panasonic Lumix DMC-FT1
The shaft extension in place on the altimeter setting knob.
altimeter knob extended: 2015-09-25
Panasonic Lumix DMC-FT1
The shaft extension in place on the altimeter setting knob, showing that the knob is now clear of the Dynon D2 and can easily be gripped.
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2015-11-03. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||