making protective cover for fuel level sender
|
|
making protective cover for fuel level sender |
|
|
 |
Navigation & Acknowledgements |
4 pictures on this page - scroll down to see the rest
mould for fuel sensor cover: 2017-11-21 Panasonic DMC-FT1
The lid of an empty aqueous cream tub screwed to a piece of chipboard, to provide a stable base for laying up the fuel sensor cover.
mould for fuel sensor cover: 2017-11-21 Panasonic DMC-FT1
The aqueous cream tub attached to a piece of chipboard by its lid, to provide a stable base for laying up the fuel sensor cover.
fuel sensor cover layup with mould: 2017-11-21 Panasonic DMC-FT1
The fuel sensor cover layup removed from the tub used as a male mould (which had to be destroyed to separate it).
fuel sensor cover layup with mould: 2017-11-21 Panasonic DMC-FT1
The fuel sensor cover layup removed from the tub used as a male mould (which had to be destroyed to separate it).
 go to previous picture page |
back to journal page |
go to next picture page |
 go to list of photo pages
|
||
| Return to Rowland's home page |
| This page last updated 2017-12-13. I try to make this page as accessible as possible, by adhering to HTML 4 standards. |
|
|
| I welcome comments on this website. However, because of the amount of spam it attracts, I no longer post a direct e-mail address on any page. Instead, please click here to contact me. You will have to confirm that you are human before the message will be sent on to me. | ||